Carrera Hybrid Mop Adapter

Carrera Hybrid Mop Adapter – 3D Print File

🚗 Description:

This STL file provides a specially designed mop adapter attachable to a Carrera Hybrid car. This allows your car to clean the racetrack while driving—a practical and entertaining solution for pristine tracks!

🛠 Print Settings:

• Recommended layer height: 0.2 mm

• Infill: 20–30 % (depending on desired stability)

• Support structures: Not required

• Material: PLA or PETG recommended

📌 Assembly Instructions:

The adapter attaches to the rear of the Carrera Hybrid car. A suitable cleaning cloth can be clamped into the holder.

💡 Tip:

The mop adapter is compatible with Swiffer Dry cloths, which excel at absorbing dust and dirt. These cloths comprise 79% recycled synthetic fibers and offer three times the dust pickup.

🔄 Important Note on Using Swiffer Cloths:

Swiffer cloths feature two pre-creased folds. To ensure proper fit within the holder, one of these creases must be trimmed. This design consideration facilitates seamless printing with the Bambu Lab A1 Mini. Without this adjustment, the cloth would not fit correctly.

🔧 Application:

1. Trim the Swiffer cloth along the designated line.

2. Insert the cloth into the adapter.

3. Attach the adapter to the Carrera Hybrid car.

4. Start the car and maintain a spotless racetrack!

Enjoy hybrid driving and cleaning! 🚗💨🧼