Instrument holder

A coworker asked me to get creative with a little instrument holder for his Subaru. 

So we created an instrument holder with two Cups for a 59mm and one for 68mm.

The Depth of the hole construction is 65mm. We got plenty of space left for all the cables inside the holder.

The hole is in the back is for the cable outlet, you cant see on the photos. The 90° pipe was glued in the back to cover the wires as good as possible.

The “Foot” is glued in and bolted down to the aluminium foot.

I wanted to share this project for inspiration and adaption.

Please leave some comments, i want to get better doing something like this.