16 oz Solo Cup Holder - Free 3D Print Model

Search models, users, collections, and posts

Lukes3D

Household>Decor

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

10.7 h

1 plate

4.8(37)

Open in Bambu Studio

Boost

411

1216

941

564

Released

Bill of Materials

Bambu Filaments

Select all

PLA Basic

Description

My wife loves making iced coffee before work, but the downside to that was having to bring home a cup at the end of the day which is gross and not very easy to clean. So our solution to that was to buy these cups from Amazon and print a storage solution to make it neat next to our expresso machine.

The Holder fits a standard 16 oz solo cup with the lids and straws, It is a very simple, easy way to store these on your counter.

Please let me know how it works for you

It is a longer print due to it being a large object and I wanted it strong, so everything is a little thicker than it had to be. That is just to make it last longer without and issues. I also have Ironing on wich is not necessary what so ever so feel free to turn that off.

Boost Me (for free)

Please boost my model so it reaches more people, that continues to motivate me to work in fusion 360 and get better at modeling!

coffee accessory organizer

Comment & Rating (53)

@user_1086599778

10/10. BUT I will say, I think it’s over engineered. took way too long for what it is, maybe too much support structure? idk I’m new. this is like my 4th print. I will say I thank you for the comments that scaled it up for 20oz cups.

The designer has replied

@Lukes_3d

Its a big print so that a big part of the time but i made it as strong as it is because those walls are only .1 in thick so i wanted it to be strong enough for long time daily use. it is very easy for you to change it yourself in the slicer as well you could've dropped the walls and the infill and it would have taken a little less time. You do lose a lot of strength when you do that though! Thanks for the Review and have fun printing. (Learn to design it is a lot of fun to picture something that solves a problem and make it a reality)

@BonnieSue

Print Profile

0.2mm layer, 2 walls, 15% infill

I made it a bit shorter by cutting the top off slightly in Bambu Lab (to save time and filament) and printed at 108%. I have 24oz Stackman brand cups bought from Amazon and it fits perfectly! Such a huge improvement for my kitchen!!! Thank you for such a great design! I absolutely love it and printed perfectly!!!

@user_323191833

how did you make it shorter? i have those cups also 24 ounce but new to this so I am not sure how to do that. thanks

@bassix187

Print Profile

0.2mm layer, 2 walls, 15% infill

Scaled it up to 105% to fit the cups we have. Great design, Works awesome, my wife loves it!

The profile uploader has replied

@Lukes_3d

I'm glad that it works well for you!!! thanks for the comment

@user_1818021714

Print Profile

0.2mm layer, 2 walls, 15% infill

This is perfect to hold the cups and lids for iced coffee at my pie shop!! now I need to make another for the hot cups and lids and I need a cup sleeve dispenser!!

The profile uploader has replied

@Lukes_3d

I can make them and upload them, send me some dimensions for the cups or even the link to but them and ill figure it out

@user_1818021714

Replying to @Lukes_3d :

That would be awesome! I will get that information for you today and send it over.

@Lukes_3d

Replying to @user_1818021714 :

sounds good!!

@lanikint

Boosted

Great model, printed well. Had to scale it by 2.68% to fit 24oz cups and lids, it's more the lids that needed the extra space. Great, will boost twice!

The designer has replied

@Lukes_3d

Thank you!!!

@user_2485450209

thanks for saying what you scaled to.

@Njlax28

Print Profile

0.2mm layer, 2 walls, 15% infill

Very good print, I scaled it up to 105% to make it so my cups fit. 20 ounce hot Dixie cups from Sam’s Club fit the original 16 ounce cold plastic coffee cups you have to scale up slightly

The profile uploader has replied

@Lukes_3d

Thank You!!!! Glad it worked for you

@user_1637612440

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

great for keeping the counter organized

The profile uploader has replied

@Lukes_3d

Thank You!!!1 for the print and review

@mdelato916Q1

Print Profile

0.2mm layer, 2 walls, 15% infill

I printed at 105% for X and Y to accommodate for the fatboy solo cups and strawless sip lids. came out perfect in Marble PLA

(Edited)

@MH7294

Print Profile

0.2mm layer, 2 walls, 15% infill

very nice design.

@Chattin85

Print Profile

0.2mm layer, 2 walls, 15% infill

Product as described. Printed perfectly and the ironing settings were on point

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Modern Design Ribbed Pencil Holder, Pencil Cup

Deltaprints

38.6 k

13.2 k

16 oz deli cup holders

Zibbernickle

Tiki Solo Cup Holder

Timayhans

486

227

16 oz can holder

chrischarchar