Search models, users, collections, and posts
Steph Curry Hueforge
Print Profile(1)
0.08mm layer, 2 walls, 25% infill
Designer
3.2 h
1 plate
Open in Bambu Studio
Boost
20
60
14
4
81
57
Released
Description
Project: stephcurry.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 134.17x178mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu Yellow Transmission Distance: 10
PLA+ Esun Bone White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #13 (1.12mm) swap to Yellow
At layer #20 (1.68mm) swap to Bone White for the rest.
If you resize do not use uniform resize. Leave the z the same.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (14)