Burger Fidget Clicker - Infinity Edition

Craving a good burger? Patty, Cheese, Tomato, Lettuce…. You wanna take your burger EVERYWHERE!

Unfortunately, as with the Grilled Cheese, that would be a gross mess after a few days… but never fear!

Clickey Burgerz are a customizable clicky Burger/Sandwich that's cute, keeps you satisfied for hours, and like a real burger you can make it as big as you want! Just add a Keyswitch (I've used Kailh Navy Switches which cost about 31 cents each!)

That's right, due to the Modular design, you can make this burger with any ingredients you want, and it can be made infinitely tall and still click at the top!

As long as you follow some simple guidelines, the clicker should work flawlessly no matter what ingredients you choose, Examples are also given here and below:

• The Distance between the piece that the Keyswitch is inserted into, and the Last piece before adding the Top Assembly (Click Pin and Top Bun) is 11mm. This is illustrated in the below image
• The Meat Pieces are the same height as two Salad Pieces. So after inserting your keyswitch, you would need Either Two pieces of Meat, 4 piece of Salad, or 1 Meat and 2 Salad
• The “Ham” piece can be printed in Purple/Red/White (Eggplant/Tomato/Onion) to act as a vegetable patty for a vegan burger

Here are some recipes i've cooked up for you:

See Below for some instructions, as well as examples.

	Insert the Cheese pieces into the Patty Pieces. These should snap fit tightly.
	Start with the Bottom Bun Piece. if using the Keychain Version, Insert the ring of the Keychain MA001 into the slot on the side.
	Add a Cheese'd Patty. Use Glue
	Press the keyswitch into the square hole. Use Glue.    Skip this step if not making a clicker.
	Add another Patty on the top. Use Glue.
	Add your first Salad piece, shown here is tomato. Use Glue
	Add your second salad piece, shown here is some Lettuce. Use Glue
	Fit the Click Pin onto the stem of your keyswitch. Two variants are provided, a Tight fitting MX style, and a generic circle style. Use Glue.   Skip this step if not making a clicker.
	Fit the Top Bun onto the Click Pin. Use Glue.   If not making a clicker, Fit the Top Bun onto the Salad Piece. Use Glue.

You may need to Bend the Pins on your keyswitch before inserting it, as shown below