Color Grim Reaper - Free 3D Print Model

Search models, users, collections, and posts

mlupien

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.08mm layer, 2 walls, 100% infill

Designer

3.4 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

Released

Description

All of the pictures displayed are of the actual models. Please take a moment to rate and endorse the models, as it is very helpful.

Color Grim Reaper

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 160.03x170mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Blue Transmission Distance: 4
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Basic Orange Transmission Distance: 7
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA PolyLite White Transmission Distance: 5
    PLA BambuLab Basic Black Transmission Distance: 0.6
This print uses 7 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Blue
    At layer #9 (0.8mm) swap to Red
    At layer #11 (0.96mm) swap to Orange
    At layer #17 (1.44mm) swap to Yellow

Border Only Colors from here until the end.
At layer #20 (1.68mm) swap to White
At layer #29 (2.4mm) swap to Black for the rest.

Comment & Rating (1)

@ChefCraig32

Print Profile

0.08mm layer, 2 walls, 100% infill

This is awesome. The flames and the detail are outstanding. The blue really gives it a little something extra. Would like a version without the frame. No complaints though. Great work.

No more