Swatch Display Ferris Wheel
Print Profile(4)
Bill of Materials
Description
Boost Me (for free)
This took me quite a bit of time and experimenting, a boost would be greatly appreciated. 😁
I saw many swatch displays that lay flat, and I thought they were a bit boring, so I challenged myself to make a vertical swatch display! This clever swatch display is aesthetically pleasing and very fun to play with.
Bearing recommended - (but not required):
Don't have the required bearing? Tell me which one you have in the comments, and I will make one!
In the 3mf, there is a separate plate that contains a stand that doesn't need a bearing.
I recommend using a bearing as it makes the spinning experience smoother.
I used a 6803-2RS bearing, link here: https://www.amazon.com/dp/B0C74XCGHP?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1
Assembly Instructions:
Place bearing down on a flat table
Press wheel into bearing. It should be a tight fit. Make sure the wheel lays flat with the bearing.
Place the stand on the table and press the wheel with bearing into the stand. Make sure to leave a bit of space in between the stand and wheel.
Press the catcher into the stand.
- Finally, load your filament swatches in your favorite order!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (187)