Nolan to Freedconn Adapter (modelled on N70 2x)

So I recently got a Nolan N70 2x and was told the Nolan branded system wasnt very good and expensive, so I designed an adapter that fits into the existing Nolan connection points and makes a plate the securely holds the audio module in. 

I've ridden with this for a few months now and it seems to work great, I've tweaked the model a bit further from the first upload to enable a closer fit to the helmet, a tighter fit to the freedconn unit and making it grippier in the helmet. 

When inserting it just put one side in first before pushing in the other when putting it onto the helmet, and I'd recommend removing the plate from the helmet to remove the freedconn unit as you have to slightly push the top of the plate to release it. 

I just have it set to  0.16 optimal and I used ABS, it should cost about £0.10 to print and its worked great for me, but hopefuly some one will find it useful =) 

Hopefully it'll come in handy for other people.

Let me know if you have any issues