Print Profile(1)
Bill of Materials
Description
A square lithophone light box that rotates. This makes a great gift. Do not use PolyLit PLA Pro for the lithophanes as it won't work (recommend Sunlu White personally).
See assembly guide for full instructions
Non-3D Printed Items Needed:
- The Makersupply items listed below
- 4 pictures (cropped 1:1 ratio preferably) (5 pictures if you are using the lithophane lid)
- *Optional: USB Extension Cord (the cord in the bundle is very short)
- *Optional: Smart Plug (You can set an on/off schedule for the light)
3D Prints:
Plate 1: Base; 1 needed
Plate 2: Base Cap; 1 needed
Plate 2: Motor Cap; 1 needed
Plate 2: Pin; 4 needed
Plate 2: Gear; 1 needed
Plate 3: Rotating Base; 1 needed
Plate 4: Frame; 1 needed
Plate 5: Lid; 1 needed*
Plate 6: Lid – Hearts; 1 needed*
Plate 7: Lid – Paw; 1 needed*
Plate 8: Lid – Wedding Bells; 1 needed*
Plate 9: Lid - Lithophane; 1 needed*
Plate 10: Light Mount; 1 needed
Plate 10: Light Clip; 2 needed
*Only one of the 5 Lid options is needed
ItsLitho.com Settings (Side Lithophanes):
Shape: Plane
Width: 110mm
Height: 110mm
Min Thick: 0.8mm
Max Thick: 5mm
Depth: 4mm
Angle: 45 deg
Mm per Pixel: 0.1mm
Preview Model: Native
ItsLitho.com Settings (Top Lithophane):
Shape: Plane
Width: 109mm
Height: 109mm
Min Thick: 0.8mm
Max Thick: 5mm
Depth: 4mm
Angle: 45 deg
Mm per Pixel: 0.1mm
Preview Model: Native
See all my lithophane light box designs at https://makerworld.com/en/collections/14413396-lithophane-light-boxes
Pictures: I love seeing pictures of your final prints from my design (genuinely). If you are doing cake pops I love seeing the final cake pops also!
Design requests: If you have a design request feel free to send me a message regarding it and if it's something I can do I will give it a try!
Ratings: If you rate less than a 5 star rating please provide detailed reason as to what the issue is and pictures if possible. I'm always looking to improve designs but can't do so without feedback. Please make sure the issue isn't related to your specific setup/filament and keep in mind silk filament tends to be weak.
Please boost!! Boosting my designs helps me fund my hobby and keeps the designs coming! Thank you to all that provide boosts!
Boost Me (for free)
Selling: If you would like to sell prints of my designs please please subscribe to my membership. I think I have the memberships priced affordably for most people and the funds help me continue my hobby and cover filament/maintenance. Thank you for those who subscribe and don't steal the designs.
Membership
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (11)