Architectural Trees Basic Pack #4 - Spiral shape
Print Profile(1)
Description
3 individual tree/plant models for architecture projects optimized for 5 different scales, print-in-place.
Use freely in your own architectural projects with attribution to Citylab.lv, or purchase a Commercial-Use License on my website.
(!) Print with the settings I'm sharing. A small inaccuracy can lead to a failed print when printing trees and plants with overhangs. So most importantly - print with low speeds (but not too low), including travel, and minimize warping on overhangs, so keep cold air away from the print. Keep bed temp a little higher for some material softness if the trees have trunks, so it can bend a little without breaking. Use 0% infill and no supports. Tested on BambuLab P1S with old and brittle PLA filament to be sure that the models and settings are as fail-proof as possible.
(!) Changing scale not recommended
(!) Tested only on Core-XY printers (bedslingers not recommended)
For any feedback and inquiries contact me: citylab.lv@gmail.com
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)