NEW Sanding Block With Tensioner, HRCv2 available!

Search models, users, collections, and posts

vajcnerd

Tools>Hand Tools

IP Report

Print Profile(10)

All

A1 mini

H2D

X2D

X1 Carbon

P1P

P1S

H2C

H2S

H2D Pro

P2S

X1E

A2L

HRCv2 NO-AMS version 0.2mm layer, 3 walls, 25% infill

Designer

4.1 h

3 plates

4.9(200)

AMS Color 0.2mm layer, 3 walls, 25% infill

Designer

5.8 h

2 plates

4.9(503)

Single Color 0.2mm layer, 3 walls, 25% infill

Designer

2.8 h

1 plate

4.8(734)

HRCv2 AMS version 0.2mm layer, 3 walls, 25% infill

Designer

7.8 h

3 plates

4.9(93)

Click to see more

Open in Bambu Studio

Boost

9637

26023

1969

1.6 k

24.9 k

13.7 k

Released

Description

3D printing and 3D graphics are my hobby and partly a source of income. If you like some of my models, please like :)

NEW Sanding Block With Tensioner, HRCv3 available!

https://makerworld.com/en/models/1802354-new-sanding-block-with-tensioner-hrcv3-available#profileId-1922078

Thank you all for your support and comments, that's why HRC v2 could be created, which has minor improvements. I hope you will be even more satisfied with HRC v2! Thank you all very much for your support!

No supports, no gluing, AMS and NO-AMS versions.

Sandpaper format: 280x38mm
The size of the model can be changed according to your needs, but the sandpaper format will then be different.

Changes:

Better optimization of the model for printing
Adjusted thread clearance
Adjusted body design
Reinforced lower part
Extended clamping element with guide
Just more HRC :)

NEW sanding block with tensioner!

Change size as needed, no support, no gluing!

New, try it too

PAPER BAG VASE!

https://makerworld.com/en/models/2708280-paper-bag-vase#profileId-2999987

https://makerworld.com/en/models/2146138-all-in-one-a1-and-a1mini-accessories-poop-cable#profileId-2325227

https://makerworld.com/en/models/1925986-your-best-free-tesla-cybertruck-1-16#profileId-2067024

Boost Me (for free)

I would be happy if you support my model.

Try my other popular models!

https://makerworld.com/en/models/1207539-new-sanding-block-v2#profileId-1221656

https://makerworld.com/en/models/1215703-ultimate-car-home-ashtray-anti-odor#profileId-1231458

https://makerworld.com/en/models/1066225-hrc-clamp-resizable-max-strong#profileId-1055284

https://makerworld.com/en/models/734908-finger-chopsticks-for-gamer-gaming-snack#profileId-666795

https://makerworld.com/en/models/1286633-ultimate-car-home-ashtray-anti-odor-v2#profileId-1315872

Membership

If you want to support me regularly, please do so here.

Join

Boost Me (for free)

Thank you all for your support, you will support my further work.

Comment & Rating (1969)

@user_242538181

Boosted

Print Profile

Single Color 0.2mm layer, 3 walls, 25% infill

40 years of Woodworking and I can say this is brilliant! My only suggestion would be to make the treads coarser.

The profile uploader has replied

@vajcnerd

I really appreciate your opinion and praise. Thank you.

(Edited)

@realMrScary

Boosted

This is an awesome little sanding block. I'm really blown away by how well it's engineered and how the threads just work perfectly (printed on an X1C). I just sliced off a 1-7/16" strip of sandpaper from a normal sheet on a Fiskars paper cutter and it fits perfectly. I would love to see a smaller, scaled down version that works with the short side of a sheet of sand paper too!

The designer has replied

@vajcnerd

Reducing it is not a problem, I printed it but I already gave it to a friend.

@realMrScary

Boosted

Replying to @vajcnerd :

do you by chance remember the scale? I wider version of this block would be nice too. Thanks

@bhahaha24

Boosted

Replying to @realMrScary :

not sure if you’re still looking for this, but I printed this sander at 81.8% scale and it now fits perfectly with the 9” side of a sheet of sandpaper!

@BOGoodWorks

Boosted

Print Profile

Single Color 0.2mm layer, 3 walls, 25% infill

totally functional as is, and smooth print. A couple potential tweaks (understandably printed in PLA, I should print this in ABS): overall length could be shortened just a tiny bit so the sand paper sits all the way in the clamp (full length strip from a sheet), and maybe coarser threads as I already feel them stripping.

The profile uploader has replied

@vajcnerd

Hello, you can upload your print profile under my model. I have no objection to that. Have a nice day

(Edited)

@Fredotogo

Replying to @vajcnerd :

Length and width of the abrasive?

(Edited)

Show original

@vajcnerd

Replying to @Fredotogo :

Do it as you see fit

Show original

@Tolik979

Boosted

Looks good Thank you

Show original

@jeromewtf

What filament are you using Is it perfect Festool Grey and Green

Show original

@helarobin

Rear wheel is a bit hard to turn, the rest seems OK :)

The designer has replied

@vajcnerd

In some cases, this may happen, depending on the printer and filament's accuracy. In most cases, however, everything works, according to user reviews of the model.

@user_2735451422

This happened to me while printing with ASA. I separated the components and reduced the size of both screws and both sections of the rear tension by a small amount. All of it fits extremely well now.

@helarobin

Replying to @user_2735451422 :

Thanks a lot ! I'll do it this way :)

@tbrumm

Boosted

Print Profile

AMS Color 0.2mm layer, 3 walls, 25% infill

Nice!

@Floydster

This is great, and well designed. Would love to see another version that is 2.75" or 69mm wide. That would give you more sanding surface and 4 strips from a sheet of sanding paper.

@clslee.tw

Print Profile

Single Color 0.2mm layer, 3 walls, 25% infill

I used a lot of Teflon grease to get the screw to turn smoothly

The profile uploader has replied

@vajcnerd

Hi, I printed several sizes, the thread always worked, it has a slight resistance but for me it is desirable that it does not loosen on its own. You can certainly lubricate it if you prefer.

@user_2332894346

Boosted

Some resistance on the extension screw on mine also BUT as I printed the blocks in PLA & screws in PETG (was already in the AMS) it came out better than I expected. Excersising, and a some liquid silicone helped considerably. Excellent design.

@user_1233412838

Hi there! 😊 I've recently featured your amazing design in one of my videos, and it’s been getting great reactions— several viewers even asked where they can buy it! Would it be alright if I kindly mentioned your membership page to help direct interested people your way? Of course, I’ll include proper credit and a link if you’re okay with it. 🙏 Just wanted to ask first before sharing anything.

The designer has replied

@vajcnerd

perfect, sure you can publish me and the path to the model. Thank you!

@user_42388313

A nice sanding block. It feels good in the hand. All the threads in my print worked perfectly. The tensioning block is slick. Be advised that the clamping block is not symmetrical. It'll probably work whichever way, but there is a forward and rearward orientation to it. A smaller version would be desirable or at least instruction on reduction percentage to achieve a specified size. KISS. Since dimensions aren't given in the listing here they are. This block is approximately 5-1/4" long (133 mm). It takes a length of sanding paper approximately 11-3/4" x 1-7/16" (300 mm x 35 mm). I wouldn't shorten the length. It's the 1/4" on each end that really provides the bite for the clamping block.

(Edited)

The designer has replied

@vajcnerd

Thank you for the description.

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.