Search models, users, collections, and posts
Dr. Strange hueforge
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
4.9 h
1 plate
Open in Bambu Studio
Boost
29
43
0
0
14
6
Released
Description
Project: strange.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 110.04x170mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Beige Transmission Distance: 8
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #14 (1.2mm) swap to Blue Gray
At layer #20 (1.68mm) swap to Beige for the rest.
License
This user content is licensed under a
Creative Commons Public Domain
Comment & Rating (0)