Image Transmissionshell(Power Management Section)

This is a modified enclosure for a 4.3-inch video transmission receiver screen. LED strip lights can be embedded within the enclosure to provide illumination in low-light conditions, facilitating location of the video transmission receiver screen. M3 x 15mm screws (or similar) are required. Two buck converter modules and a 2s-6s battery are also necessary. (Two buck converter modules are required if LED strips are to be installed; otherwise, only one is needed). The video transmission screen uses a 5V power supply; adjust the buck converter module to output 5V accordingly. For the LED strip power supply, adjust the other buck converter module to the required voltage. All battery interfaces throughout the enclosure utilize XT60 connectors. Three or more rocker switches are needed to control the main power, video transmission operation, and LED strips. The following links are provided (purchasing the exact items from these links is not mandatory; functional equivalents suffice):

Buck Converter Module：XL4015 Adjustable Step-Down Power Supply Module 4005DC-DC Voltage Regulator 5~35V Constant Current Constant Voltage 5A High Current-tmall.com Tmall

Rocker Switch (select the two-pin KCD11 model): KCD1/3/4/5/11 Mini Rocker Switch Water Dispenser Electronic Scale Power Button Rocker Switch 2-Pin 4-Pin 3-Position-tmall.com Tmall

Note: This model pertains to the power management component; the video transmission screen component is detailed in a separate model on the homepage