Pyra-Nexus City

In the year 3057, Pyra-Nexus emerged from the desert sands, a towering pyramid of gleaming glass and ancient stone. Built upon forgotten foundations, it bridged eras, merging the past with the future. Its core pulsed with technology powered by secrets lost to time. Within, the ancients’ wisdom had fused with the future’s innovation, giving birth to new energy sources, interdimensional travel, and mind-melding AI. The past had not died but waited to reshape the world once more. 
Pyra-Nexus was the key.
The future had burst forth, not for evolution, but for the humanity to thrive.

This Architectural building is a symbolism of the future emerged from ancient past carrying the legacy of our ancestors to the future generations.

Model Size Assembled: L: 179.8 mm x W: 179.8mm x H: 205 mm

Kindly care to do the proper calibrations and filament flow rate, and clean the build plate before you start the print to end up with a satisfying result.

For A1 Mini owners, you will have to modify the following setting:
under the “Other” tab….
Disable - Prime tower
Enable - Flush into infill

Enable - Flush into support

Assembly As Shown below, use this section view to understand how the parts staged to fit
assembly is very basic just stack and fill the blanks with the corresponding shapes, the parts should fit snuggly into place.

Note: in some fitted parts you might need to apply a small drop of glue to keep some parts permanently in place.

enjoy the print ^^