Omniwall Milwaukee M12 Install Driver Chuck Holder

Check out my other Omniwall and Milwaukee related designs:

Onmiwall Milwaukee M12 Tool Holder here: https://makerworld.com/en/models/420418#profileId-323115

Omniwall Milwaukee M12 Battery Holders https://makerworld.com/en/models/607743-omniwall-milwaukee-m12-battery-holders

This is a holder for Milwaukee M12 Installation tool driver chuck holder. I used @vidision's blank Milwaukee hook base design. I made changes to the hook for better insertion and connection with the Omniwall. I remixed the hook with @AdamL's Milwaukee M12 INstallation Drill driver Head Mount for Wall Control System https://www.printables.com/model/574383-milwaukee-m12-installation-drilldriver-head-mount-
I modified the battery holder with chamfer on the top back to get the tilt angle needed for insertion.

Please pay attention to the orientation of the parts. The long edge of the chuck holders needs to be on top. Also please reference the included hook picture of it top/bottom orientation.

Default printing settings will be fine. Support needs to be enabled for both the hooks and the indentations under the battery holder. Use quick drying crazy glue to glue 4 hooks to the back of the battery holder.

PAY ATTENTION to the orientation of the hooks relative to the chuck holders.