PROBE DROID - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

rosstownrd

Props & Cosplays>Other Props & Cosplays

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

49.9 h

8 plates

4.9(7)

Open in Bambu Studio

Boost

212

677

283

Released

Description

THIS ONE STANDS 24 INCHS TALL ABOUT AS BIG AS I COULD MAKE IT ON THE BAMBU A1

Comment & Rating (28)

@rosstownrd

been experimenting with airbrush

@Glamonica

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

scaled down a bit and painted the sensor eye red. it fits in my workshop hanging from some HSW and looks awesome.

The profile uploader has replied

@rosstownrd

good job looks great, thanks for the rating

@user_1826672926

What an excellent Print file. Thank you! it scales great with Hot Toys.

The designer has replied

@rosstownrd

glad to hear , it took quite a bit of work to scale it from original to make it big, enjoy.

@user_1826672926

I made a base and used an acrylic rod. thanks again.

@Chrisi6996

Print Profile

0.2mm layer, 2 walls, 15% infill

Large models are really cool. It printed great

Show original

@Nerfherder_80

Boosted

Awesome print. Thank you. Can't wait to prep and paint this one.

The designer has replied

@rosstownrd

Thanks

@user_1110132951

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

This thing is huge, didn't realise when I started lol, love it though. Excellent print, thanks.

The profile uploader has replied

@rosstownrd

glad you like!! it was quite a chore to upscale it as mentioned in the title stands 24 inchs tall, initial photo i put a beer can in pic for reference. lookis awesome well done , what printer did you use ?

@user_1110132951

Boosted

Replying to @rosstownrd :

Lol yeah you made it clear how tall, I just didn't read 😅 Used the good ol' A1 for it.

@user_1538156612

great print easy to put together suggestion to make a a1 mini profile for easier access but amazing print🙌

The designer has replied

@rosstownrd

take advantage while you can, new rules ruining everything, 5 of my models have already been taken down, including my mandalorian helmet,bambu has taken a turn for the worse with too many rules.

@user_599926295

Print Profile

0.2mm layer, 2 walls, 15% infill

great model . some points that need a bit of works specialy the bottem part the arms at the joints. but love it .

(Edited)

@rosstownrd

TOLERANCES ARE REAL TIGHT I HAD TO USE A RUBBER HAMMER TO PUT SOME OF THE PIECES TOGETHER

@user_2324147952

I used a small hobby file to remove the excess material.

@user_599926295

do i need to change some settings in bambu studio to get good printnig on the top round parts ? so you dont see those nasty top layers ? or is it download and print ?

The designer has replied