TP-Link Network Switch Wall Mount - Free 3D Print Model

Search models, users, collections, and posts

Fugu Factory

Household>Office

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm, 3 walls, 15% infill, Snug Supports, Only 82g

Designer

1.9 h

1 plate

4.9(17)

Open in Bambu Studio

Boost

221

841

538

305

Released

Bill of Materials

Bambu Filaments

Select all

PETG HF

Description

Wall mount a TP-Link 8x port network switch with clearance underneath / against wall, for network cable access.

This should suit most TP-Link 8 or 5 port switches, and may suit others with a Height of 25mm and Depth up to 101mm.

Printed in PETG for strength, upright and with snug supports for the mount + ventilation window.

(I found these were the most filament efficient options)

This WAS modelled to almost be an interference fit with only .5mm clearance, so make sure to clean up all support material.

Comment & Rating (28)

@user_41574241

Printed two already. Perfect. I've also created base plate, so you can mount it to the wall using double sided tape Base plate: https://www.thingiverse.com/thing:7256157/files

(Edited)

@RubAnADUB

Boosted

My TP-LINK TL-SG100SP fits real snug with only a little tiny bit of sliding front to back. Also is a perfect fit for a TP-Link Omada ER605 v1.0 router. Heres a boost and a big thank you! GREAT PRINT!

@KingstonFX

Boosted

Print Profile

0.2mm, 3 walls, 15% infill, Snug Supports, Only 82g

Bulky but sturdy, yet the tolerances for the fit are tight and I am liking it. Used support filament for the supports and they separated very cleanly which helped maintain the tolerances specified by the model designer. No issues and its a great model, appreciate it. Printed in Bambu Lab PETG HF Black and Bambu Lab PLA/PETG Support Filament.

@Coddiwomple_FL

great print - appreciate the measurements ahead of time on the print - I upscaled it to103% on height dimension that and a bit of extra sanding with my Dremel tool and this design worked perfect for my Netgear GS308 switch. I really wanted to use your build as it elevates the switch. My original plan was to place it right over cabling hole in the desk. Changed my mind but can still run cables under the same as the power cable is now.

@kcalvert77

Boosted

Works great.

The designer has replied

@FuguFactory

Thanks for the Boost 🤩

@iovenitti

Hi, can this be attached to 80x40 Extruded Aluminium as it is? or it requires adjustments in the holes distance? and are the holes fit for an M6 bolt? thank you

@Kozinc

Boosted

Good model, fits perfect to TP-Link 8 port switch.

@user_2134689023

Boosted

printing right now!! thanks!

@user_2385664716

Print Profile

0.2mm, 3 walls, 15% infill, Snug Supports, Only 82g

fits just right great print

@mircea_maris

Print Profile

0.2mm, 3 walls, 15% infill, Snug Supports, Only 82g

(Edited)

The profile uploader has replied

@FuguFactory

Why only 4 stars? can you give feedback please?

@mircea_maris

Replying to @FuguFactory :

'cause I'm old and I missed it

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Wall Hook with one Mount

PrintManufaktur

22.2 k

8.2 k

IKEA Skadis Wall Mount

AU3D

31.7 k

9.8 k

Guitar Wall Mount

VICLER

22.2 k

5.8 k

Switch Fidget

3D Delight

39.2 k

7.4 k