HO Scale Layout Model | Brick Storefront Building - Free 3D Print Model

Search models, users, collections, and posts

c0mfortcruise

Miniatures>Architecture

IP Report

Print Profile(2)

All

H2D Pro

H2S

H2C

X1 Carbon

P1S

P1P

H2D

P2S

A1 mini

X1E

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

9.9 h

1 plate

4.9(8)

0.16mm layer, 2 walls, 10% infill

11.3 h

2 plates

Open in Bambu Studio

Boost

187

476

332

Released

Description

Boost Me (for free)

Boosting is free, and supports me just as much as a membership! Your points go straight to my filament and printer part costs, fueling more dope models like these!

See this building in action on my YT channel here, where I used it in a micro-sized trolley layout:

https://youtu.be/NaicaotbO9U?si=WqkwTkwEd1a_pqvH

Originally made this design for N scale, but after I recently needed it for another project in HO I decided to scale it up for it to be used in it. I'm not a great 3D modeler so there's a couple minor errors in the way it's put together, but overall it should serve you well on your layout. Added a brim to prevent warping during printing, which I found is a common problem.

The design prints 2 parts in one plate, the main walls and the roof. Just glue the roof to the walls when it's done printing with super glue and you're done. Printed mine in Anycubic gray, it's already a good primer color so I was able to paint directly to it without any issues. For windows, I just cut pieces of flat clear plastic recycled from packaging. The results really speak for themselves!

Happy printing, feel free to ask me if you have any other questions!

Membership

your contributions as a commercial member both give me the financial incentive to continue creating valuable designs, while also providing you with the opportunity to resell parts and models to hobbyists without printers!

Join

Comment & Rating (11)

@user_701178871

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Very nice. I split the front and back off the model and painted them in Bambu Studio so I could print with AMS in a reasonable time and reducing waste

The profile uploader has replied

@c0mfortcruise

Dude that came out NICE! great idea to split it up, definitely would've been a lot worse if you tried a multicolor print as-is. Thanks for sharing!

(Edited)

@StandAloneX

Print Profile

0.16mm layer, 2 walls, 15% infill

Detail and lines came out very clean. I wish the top snapped or held in to place without requiring glue, but that’s just a nitpick.

The profile uploader has replied

@c0mfortcruise

Thanks for the feedback, I can definitely look into snap-fits for future models!

(Edited)

@user_1969416771

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

(Edited)

@ampalaencina

Boosted

It looks promising I will prepare it to see if we can modify it and add more floors

(Edited)

Show original

@user_3158155478

Print Profile

0.16mm layer, 2 walls, 15% infill

@spooderman

Print Profile

0.16mm layer, 2 walls, 15% infill

@user_1947707970

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

@Ljonesj

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

@user_1998789617

Print Profile

0.16mm layer, 2 walls, 15% infill

No more

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.