Screw Cap Spout for Mason Jar Lid

A screw cap sealed spout for Mason Jar lids, which provide controlled pouring of both liquid or solid contents from your Mason jar.  Screw-on cap provides tight seal to avoid spills.  Screw on Funnels provide easy, hands-free access to add contents.   

• Two sizes to accommodate the WIDE-mouth or Normal mouth Mason Jars. 
• Two spout opening sizes: 20mm and 25mm. The 25mm Spout opening is presently only available for WIDE-mouth Mason jar

Easy prints, no supports required.  Please print the caps and funnels detached from the screw opening and upside-down.

3MF files have two print heights, higher resolution for the thread printing sections.

NEW: Wide Mouth Lid and screen available here:
https://makerworld.com/en/models/1470939-wide-mouth-mason-jar-lid-and-screen#profileId-1535206

Use with food items at your own risk based on your choice of printing material.

Recommend: 

• Height Range Modified layer heights: 0.2mm for the body, 0.12mm for higher resolution threads; and
• PETG, I have not tested using PLA but, it should print.

Print profiles:

• Both regular spout (20mm) print profiles with caps;
• 20mm spout for normal-lid Mason jars; 
• 20mm spout for WIDE-mouth Mason jars;
• 80mm Screw On Funnel for the regular (20mm) spout for both normal and wide-mouth Mason Jars; and
• Large spout (25mm), only for WIDE-mouth Mason jars.
• Large spout (25mm) Funnel for WIDE-mouth Mason jars.
• Screw on lid (full or for screw cap spout) for normal lid Mason Jars.
  • With or without hole; and
  • optional side text.
• Screw on lid with 2mm hexagon screen
  • 20 mm; or
  • 25 mm
  •  

Wide Mouth Mason Jar Screw Lids and screens are available here:
https://makerworld.com/en/models/1470939-wide-mouth-mason-jar-screw-lid-and-screens#profileId-1535206
 

Shout out to @dfreshkremer for his ‘Parametric Threaded Jar’ tutorials.  

Check out his MakerWorld content and his YouTube channel: https://www.youtube.com/@ShopTherapy623