Super Lube Applicator Caps for A1 / A1 mini / A2L - Free 3D Print Model

Search models, users, collections, and posts

Henryk

3D Printer>3D Printer Accessories

IP Report

GIF

Print Profile(5)

All

P2S

X2D

P1S

H2D Pro

A2L

X1 Carbon

P1P

X1E

A1 mini

H2S

H2C

H2D

v2 - No color change - 0.2mm layer

Designer

1.4 h

2 plates

4.9(520)

v2 - Dual Color - 0.2mm layer

Designer

1.5 h

2 plates

5.0(152)

v2 caps - improved bed adhesion

Designer

28 min

1 plate

4.8(107)

Optional Gridfinity Bins

Designer

2.8 h

2 plates

4.9(11)

Click to see more

Open in Bambu Studio

Boost

2605

7329

933

342

7.3 k

6 k

Released

Description

UPDATE v2:

tighter fit
increased ducts size for improved flow

You don't need to reprint the case if you already have v1 and want to update to v2. Pick the print profile for just the Caps.

These oil applicator caps will help you apply an even coat of oil to the linear rails and rods of your A1 / A1 mini / A2L 3d printer. They fit standard 4 oz / 118 ml Super Lube / Synco Lube bottles (51004 / 52004 / 53004 etc.). The carrying case is designed so you can attach the applicators to your bottle without touching it, so your hands will not get greasy. It also has room for the original bottle cap.

I recommend using Super Lube multi-use synthetic lightweight oil (52004)

Information about build plate adhesion

It's generally possible to print the tips without a brim. Depending on the material used it can be challenging. If you have trouble with build plate adhesion you can add a brim.

A print profile for gridfinity bins (both for the kit alone or kit + super lube bottle) is available.

Boost Me (for free)

Thank you for your support!

super lube

super lube grease injector

superlube

super lube injector nozzle

Comment & Rating (933)

@Painhawk

Boosted

Print Profile

v2 - No color change - 0.2mm layer

I printed it in transparent material so that the oil is visible during lubrication

The profile uploader has replied

Show original

@Henryk

Great idea 😁

(Edited)

@Shefeto

Boosted

😳🫣

@schoonie3d

Boosted

I did the same. looks and works awesome

@Norkius

Print Profile

v2 - No color change - 0.2mm layer

Haven't used them yet but this is exactly what I was looking for. I had some adhesion issues but that's on me, my plate is not as clean as it should be. Print was great, model is great, thanks!

The profile uploader has replied

@Henryk

Glad you like it! Is that tri-color filament?

(Edited)

@Norkius

@Henryk Glad you asked! I'm a little excited about that one, ziro tri color matte, here's some additional images. 😁

(Edited)

@Henryk

Replying to @Norkius :

The color transition looks really clean. I need to get my hands on that. Thanks for the info.

(Edited)

@FelipaoMoral

I tried to print it 3 times and all failed

The designer has replied

Show original

@Henryk

Hi, you need to clean your build plate with dish soap and water and run the bed leveling calibration.

@ssweat

yes obviously a bed cleaning issue use hot water and dawn dish soap or similar nothing else!!! NO ALCOHOL just dry it with paper towel and dont touch the build area, hold it on the edges

@seavord

im with you, printed 3 times and each time it failed..cleaned with soap and hot water failed when it got to a certain point..

@Tripstrilles

Boosted

@Henryk I printed it. Great idea. Can't you change it so that the oil can motif can be colored It's almost unrecognizable like this I reprinted and opted for the right lid

(Edited)

Show original

@manicken.se

Boosted

Pure genius. The hinge, the box, the caps and the general management of handling everything is just chefs kiss. Bravo. Just wish you could add a model of the original cap as well since mine didn't come with one :(

The designer has replied

@Henryk

Hey, glad you like it and thanks for the boost. I had the cap already modeled and uploaded the stl now. You can find it under "Download STL/CAD Files".

@PandaGThrilla

Boosted

Print Profile

v2 - No color change - 0.2mm layer

words that come to mind after printing this. genius. inspired. stunning. masterpiece. easily my favorite accessory I’ve ever made and I’ve only used it once. bravo. well done, all around.

The profile uploader has replied

@Henryk

Awesome! Glad you like it!

@LivPrintsStuff

does it work with the little lubricating oil tubes that bambu made that comes with the printer itself?

@bvilleblaze65

Print Profile

v2 - No color change - 0.2mm layer

printed a bit stringy and potentially too fast. I reduced to 50% speed and still got all these strings. still figuring out PETG

The profile uploader has replied

@Henryk

You will need to dry your PETG to get rid of the stringing. :)

(Edited)

@Jed56

Print Profile

v2 - Dual Color - 0.2mm layer

Great little print. All the tips contained in one simple box!.

@Mongoose_01

Print Profile

v2 - Dual Color - 0.2mm layer

Thank you for sharing the print. It printed nicely and I look forward to using it as part if the maintenance schedule.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.