Wider Foot/Feet/Stand for Hisense TV - Free 3D Print Model

Search models, users, collections, and posts

PrintMint

Hobby & DIY>Electronics

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

3.9 h

1 plate

4.9(10)

Open in Bambu Studio

Boost

343

154

Released

Description

Wider in the front so that I could fit a soundbar that couldn't fit before. For Hisense R6 or A65H TV Series and probably more. The default is the right foot mirror it for the left foot, you will know which is which by being able to read R or L on the part. I recommend printing in the orientation shown in the photo with at 0.2mm or more layer height (helps with layer adhesion), infill at 40%, supports on, 4 perimeters, 5 top layers. I printed in ASA in an enclosed chamber (you need good layer adhesion).

Support me on Patreon if you like my work or want a commercial license.

Comment & Rating (16)

@lollo_3dlab

are they also good for 75 inches

Show original

@user_1469413574

Ottima stampa

@user_3674936015

Print Profile

0.2mm layer, 2 walls, 15% infill

Bottom of legs needed some sanding after support removal. Overall a great print!

@farmboy7675

can this fit 58in Hisense tv?

@Zylixj39

Boosted

Absolutely awesome! I misplace the feet for our tv after years of having it hung on the wall and these saved me. Thank you!!

@Slamride

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Impressed by strength and ease of print. Used ABS and actually stronger than factory.

@b4rt3D

Print Profile

0.2mm layer, 2 walls, 15% infill

noce model

@breed85

I don't need wider legs I need about a 1/2" spacer to go in between the legs and the TV to raise it up so my Sonos beam will fit underneath.

@archerjake98

I have a different model of Hisense the 55RG. So designed a foot plug from scratch and remixed you feet as they looked good. thanks for publishing your design :) https://www.printables.com/model/827941-hisense-55rg-tv-stand-and-my-own-designed-plug/files

@m.romano

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Modern Remote Holder

JB Custom Designs

22.9 k

5 k

Laptop Stand

Siegroto

36.9 k

8.9 k

Vertical laptop stand

Meraki design

28.2 k

7.3 k

GIF

Adjustable phone stand

3D servis

25.6 k

6.8 k