Mushroom nutcracker - Free 3D Print Model

Search models, users, collections, and posts

Mister_P

Household>Other House Models

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 4 walls, 30% infill, supports, AMS

Designer

6.9 h

2 plates

4.9(8)

0.2mm layer, 4 walls, 30% infill, no ams

Designer

3.7 h

2 plates

5.0(1)

Open in Bambu Studio

Boost

100

179

121

Released

Bill of Materials

Bambu Filaments

Select all

PLA Matte

PLA Basic

Description

Here a little nutcracker which looks like a cute mushroom.

It can be a nice decoration in the kitchen, but not only : it really cracks the nuts very easily.

Printing : if you use provided profile, it will work without any issue, tested on P1S.

Assembly:

- assemble the hat and the screw. Normally you don't need any glue, press it strongly to assemble.

- then you will have to screw/unscrew the whole thread between 5 and 10 times to make it smooth to use.

You're ready to crack nuts and almonds !

Consider boosting if you think it is nice !

Comment & Rating (16)

@user_4270930512

Pinned by Designer

Print Profile

0.2mm layer, 4 walls, 30% infill, supports, AMS

it's adorable, and functional. Printed with Bambu ABS and works like a charm!

The profile uploader has replied

@Mister_P

Thanks for your nice review !! It looks really nice

@Sandy_Burger

Print Profile

0.2mm layer, 4 walls, 30% infill, no ams

I printed in Petg. the initial screwing in was difficult I had to use some pliers but after the initial thread everything works smoothly and I’ve cracked about 20 nuts so far and there’s very minimal damage. I highly recommend

The profile uploader has replied

@Mister_P

Thanks for your nice comment ! I will try in PETG too !

@user_4167708116

Print Profile

0.2mm layer, 4 walls, 30% infill, supports, AMS

tread would not match but live the design

The profile uploader has replied

@Mister_P

To make it smooth to use, you just have to screw/unscrew the whole thread between 5 and 10 times. If it is a bit hard at the beginning, use a cloth and you will see it works fine :)

(Edited)