Jeep At Sea HueForge V2

***WARNING***PLEASE READ***(4/4/25) So I guess Bambu has decided to convert all print profiles on MakerWorld to version 2 of BambuStudio. What does that mean? Well, I really don't know, I'm not really all that computer/tech savvy. But from my understanding from other Facebook posts, if you have not upgraded to version 2 of BambuStudio and try to open/slice one of mine or any others print profiles, all you will get is the profile geometry. You won't get my custom settings I use for HueForges. You won't get the color swaps preloaded. I've also heard that even if you have upgraded to version 2, the colors and color swaps may or may not be there but I've also heard that some of the custom settings won't be there. I will be upgrading to version 2 this weekend and will slowly go back and reslice and upload new print profiles for all my profiles. In the meantime, down below I do have the filament used and where the color swaps happen so if you upload one of my profiles and it not working right, you can manually enter the filament swaps and if you need any help with settings, please reach out. I will try to get everything updated and back to normal as soon as possible. Thank you all for your downloads, prints, ratings, comments and boost, they are all greatly appreciated. Happy Printing.***

Hello again, it's your local Jeep HueForge guy with, you guessed it, another Jeep HueForge…finally. I guess after 2500+ hours of continues, flawless running, my one and only printer decided it was tired and needed a break. But after a couple of weeks and replacement parts, I think I got all the kinks worked out and hopefully it's good to go for another 2500+ hours. I know the title for this print says version 2 but at the time of this posting there is no other print along this particular theme posted from me. The first version in this line of prints was actually by special request (yes, if you have a special request, as long as it has a Jeep Wrangler in it some way, I'd love to happy to help you with it) with a picture provided of what they wanted. I always test print, readjust and test print again until I am happy with it before posting and I was not happy with the way it turned out, but I was about ready to leave for work so didn't have time to make adjustments and I had this one ready in cue. So this is my take on their request and I do have a couple more I will be working on and posting but as I'm typing this I do have the original version reprinting and will hopefully have it posted soon. Don't forget, if you have an idea or request for a Jeep Hueforge you would like to see, please reach out to me. If you like this print, please leave a rating and a boost is always appreciated. Thank you and happy printing.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Basic Beige Transmission Distance: 8
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Blue Gray
    At layer #15 (1.28mm) swap to Beige
    At layer #21 (1.76mm) swap to Jade White for the rest.