Mini Poke Ball
Print Profile(1)
Description
Boost Me (for free)
Thank you for boosting me to help me get more filament
24mm-25mm Poke Ball model, solid infill, few parts, compatible with my other treatment machine model.
This model is small and requires a 0.2 nozzle to print, I haven't tried it with a 0.4 nozzle, let me know if you have any problems. The assembly of the model is relatively precise, it is necessary to pay special attention to the printing tolerance of your own printer, it is recommended not to modify the direction and angle of the model at will, otherwise it may cause printing failure. The assembly gap of the model has been set to 0.2mm by default, if you feel it is too tight or too loose, you can fine-tune it in the precision size compensation, be sure to pay attention not to set it globally.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (22)