My Little Pony - The Mane 6

----------------------------

My designs for free download on Makerworld are intended for PERSONAL printing use only. If you wish to sell prints of my designs, please obtain a commercial license to compensate me for my time and skills in creating these files. A commercial license to sell my Makerworld AND exclusive designs on Patreon can be found at https://www.patreon.com/busykikibee

----------------------------

8 colors, but a whole rainbow of them. This started out mostly as an experiment to see if I could hueforge all of the mane 6 ponies together in one image, and after a lot (and I mean a lot) of fiddling, I got it to work. It took a lot of playing around with the filament combinations and manipulating the depth heights, but I finally managed to bring it down from the 12 colors I wanted to use to the 8 colors I ended up using without it becoming a thick print with crater pockets between levels. 

Check out my other MLP prints on my Patreon and in my cartoon collection here on Makerworld: https://makerworld.com/en/collections/3296860-cartoons-anime-manga

----------------------------

My designs are for personal printing use only. 

A commercial license to sell printed copies of my Makerworld Designs is available. 

I also post exclusive designs on my Patreon. A commercial license to sell BOTH my Makerworld and Patreon files can be found here: https://www.patreon.com/busykikibee

----------------------------

Pictured frame, stand, or puzzle box can be found in Frames and Functional items over @CanadianGamer https://makerworld.com/@CanadianGamer/collections/1027330

All photos you see are of the actual print of my design. If you use the same filament and colors, you can expect the same result as you see in the photos. The 3mf file is AMS ready to slice and print with the height range modifier and layers prepared for you. If you are using the STL to slice and print the file, be sure to apply color swaps by their mm height and use the height modifications and infill instructions as per the directions provided. During slicing, you might get an error message about floating regions, which you can safely ignore. Finally, if you wish to scale the design, do NOT scale the Z axis. Happy printing!  

Project: MLP the Mane 6
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.5mm and the Actual Depth is 2.6mm

This print uses 8 unique filaments
PLA BambuLab Basic Black 
PLA BambuLab Matte Grass Green
PLA BambuLab Basic Maroon Red 
PLA BambuLab Basic Purple 
PLA BambuLab Basic Magenta Pink
PLA BambuLab Basic Sunflower Yellow
PLA BambuLab Matte Ivory White 
PLA BambuLab Matte Ice Blue

Swap Instructions:
Start with Black
At 0.8mm swap to Grass Green
At 0.96mm swap to Maroon Red
At 1.04mm swap to Purple
At 1.2mm swap to Magenta Pink
At 1.36mm swap to Sunflower Yellow
At 1.68mm swap to Ivory White
At 2mm swap to Magenta Pink
At 2.24mm swap to Ice Blue for the rest.
 

All photos you see are of the actual print. Using the same filament choices will give the same result. 3mf file is AMS ready to slice and print with height range modifier and layers prepared for you. If using the STL to print the file, apply color swaps by their mm height and use height modifications and infill instructions as per the directions provided. You can safely ignore any error message about floating regions. You do NOT need a prime tower if you are printing with the STL file. Finally, if you wish to scale the design, do NOT scale the Z axis. Happy printing! 

Pictured frame, stand, or puzzle box are by @CanadianGamer and can be found in his Frames and Functional items here: https://makerworld.com/@CanadianGamer/collections/1027330