Bambu Lab P1S/P1P Samsung Galaxy S7 Phone Holder

Design:

A Remix of butcher9_9 iPhone stand for the P1P and P1S adapted to Samsung Galaxy S7 phone.

The modified cover comes with BL logo or without logo. Choose the one you want

On top of redesigning the backing and cover for Samsung Galaxy S7, I modified the base to use a larger USB connector (Up to 7mm thick).

I took care to have enough place between the phone older and the AMS so you can turn the phone without touching the AMS box.

For installation instructions, please go to original model → https://makerworld.com/en/models/856724-bambu-lab-p1s-p1p-iphone-holder#profileId-1161551

The cable is connected to the USB A 5v port from the AP board inside the printer (Left connector on the picture below). Warning, this output is limited to 1.5A that is normally enough to connect a phone.

Secure cable inside the printer so it can't be in contact with any mechanical part of the printer during printing operations

Printing:

I printed mine using Black PLA filament. Any other material can do the job. 

No support is needed for backing and cover. It's only needed for the base. I personally used  Support interface Bambu Lab filament Support for PLA for easy removal. In that case, use of AMS if needed

On top of .stl and .3mf files, I uploaded .step and Fusion 360 .f3d files so you can modify the design and adapt it to your needs. 

If needed, I can design a holder for other phone models. Just let me know.

You can also look at the other models or accessories I designed and 3D printed for my P1S

• Purge Bucket for X1 Carbon, P1P and P1S series
• P1P P1S adapter for Filler Filament Holder
• AMS Dry Pod Large with Aqara Hygrometer

Not directly for P1S but useful accessory

• Filament Spool Switcher & Winder Bracket TPU

Downloads, feedback and comments (and for sure "likes") will be always welcome. Feel free to post nice pictures of your makes.

If you appreciate this project, explore my other published models.

Enjoy