Black Widow Hueforge - ChromaLink

Description

This is designed to use the ChromaLink frame made by Superseaslug. It can be printed on it's own  but it's meant to be hung up using the kit found here. If you are using it in the ChromaLink kit please follow the instructions they provided. When loaded into the kit, the colour swaps will need to be added back manually with 18 added to all the layer numbers.

Colors and Filaments

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.1
    PLA BambuLab Basic Jade White Transmission Distance: 5
    PLA BambuLab Basic Blue Transmission Distance: 2.5
    PLA BambuLab Basic Red Transmission Distance: 3.8
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #2 20(0.24mm) swap to Jade White
    At layer #4 22(0.4mm) swap to Black
    At layer #8 26(0.72mm) swap to Jade White
    At layer #11 29(0.96mm) swap to Blue
    At layer #15 33(1.28mm) swap to Black
    At layer #18 36(1.52mm) swap to Jade White
    At layer #20 38(1.68mm) swap to Black
    At layer #23 41(1.92mm) swap to Red
    At layer #24 42(2mm) swap to Jade White for the rest.