AOS7 - Antenna support
Print Profile(1)
Description
Antenna mount for the AOS 7 frame.
Initially, the top plate accommodates an SMA adapter.
This print provides antenna support if you prefer not to use an SMA extension.
This print comprises two parts. The first (L-shaped) mounts to the top plate, with the second positioned beneath.
The second part slides into the spacer.
The first part screws to the top plate; a 2mm longer screw than the original spacer screw is required due to the added print thickness.
Installation guide:
- Insert the antenna from above into the L-shaped print.
- Route the antenna through the designated hole in the top plate.
- Slide the antenna into the second print.
- Slide the other part of the second print into the spacer.
- Position the top plate, adjust antenna placement within the prints, then screw the spacer into the designated hole in the L-shaped print.
----------------------------
Antenna support for a 7-inch AOS RC frame.
Secures the antenna if you lack an SMA extension for top plate attachment.
The spacer screw must be replaced with a 2mm longer screw to accommodate the added TPU thickness.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)