Idler Pulley Cleaner for Bambu Lab P,C,E Series
Print Profile(2)
Bill of Materials
- Microfiber cloths for glasses x 1:
Description
For the printer to work without issues, it requires your care and maintenance. Idler pulleys also need regular cleaning and lubrication, but unfortunately, some of them are difficult to access, making the cleaning process much more complicated.
This simple device makes cleaning idler pulleys very easy and effective. The model prints quickly and is easy to assemble.
After printing the model, you will need to cut a strip of fabric 7.5 mm wide (I used microfiber cloths for glasses) secure it in the device, soak it with isopropyl alcohol, and start cleaning the idler pulleys.
Place the cleaner into the desired opening, press it firmly against the pulley with one hand, and carefully move the printer's printhead in the corresponding direction with the other hand. After a few movements, all the accumulated dirt on the idler pulley will be removed and will remain on the fabric.
This device is suitable for cleaning idler pulleys located in the rear corners of the printer and directly on the carbon rods.
The model has been tested on P1P, P1S, and X1E printers, and in all cases, it fit perfectly without any modifications needed.
You can find the version for P2/X2 series printers via the link below.
I hope my improvement will be useful for you.
Boost Me (for free)
Boost Me (for free)
If you like my work and want to support me and this design - please BOOST this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Thank you in advance!🙏
or
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (217)