Mount ELRS for Pavo20 PRO for O3 and O4

I created a small support for the ELRS antenna to mount on the Pavo20 pro, I wanted to use the external receiver instead of using the internal one of the aio to have greater range and maximum signal, for this reason I designed a mount that adapted to the drone and used the DJI O3 canopy attachments,

 in the photo I have an original Radiomaster antenna which is slightly larger than the others and goes slightly narrower, if you use other antennas such as the Betafpv or Happymodel they are more flat and fit better in the frame without bumping under the O3 cam.

9/6/2025 update
I changed the vtx and put the dji O4 Pro, I can confirm that the mount is perfect and unlike the O3, it has more space to mount any ELRS antenna, 

so even the Radiomaster antennas are fine, the only precaution you need to take is to loosen the front screws a little more and put a little thread lock, or change the original screws and put 2 longer than 2mm, because being the precise size, it goes to crush the softmounts of the vtx