Flying Saucer UFO Tea Light Abducting Humans & Cow

This fun UFO tea light looks great on your shelf with the LED tea lights adding ambient lighting to the area.

Printing

The print profile provided has 3 plates. The top and bottom of the saucer are on two separate plates (and for good reason), they have a variable layer height to give the best possible finish and were not able to be sliced on the same plate. 

The third plate contains the top of the flying saucer and base that ‘flies’ the saucer. Please print these in a white or close to white filament to allow maximum light pass through…

Supports have been added to the parts where required. They are somewhat challenging to remove from the saucer but do not fear about scaring. All supports are on the inside of models so its okay if you have some damage during removal…. Ensure that you clear all filaments from the ring within the saucer to that the tea light sits as snug as possible. I had to use the handy Bambu scraper to really get in there. Just take your time and don't slip! 

Assembly

Required parts: Super Glue & 2 x Bambu Tea Lights

Difficulty: Easier then removing the supports!

Once you have the parts it isn't rocket science to put together. Please use a drop or two of super glue to fix the top and bottom of the saucer together.

Do NOT glue the lid of the saucer on. Otherwise you won't be able to get your tea lights in and out!

Then simply:

• Put one tea light through the base of the UFO 
• Stack another tea light ontop
• Put lid of UFO on
• Put complete UFO onto base