Search models, users, collections, and posts
Soap Dish
Remixed by
IP Report
Print Profile(4)
Tray, 0.2mm layer, 4 walls, 15% infill
Designer
48 min
1 plate
Shell, 0.16mm layer, 4 walls, 15% infill
Designer
1.7 h
1 plate
0.2mm layer, 2 walls, 15% infill
1.8 h
1 plate
0.24mm layer, 3 walls, 30% infill
1.8 h
2 plates
Open in Bambu Studio
Boost
270
622
181
78
1.5 k
1.1 k
Released
Description
I really like the original design and a idea for water drain from user @species_249250. But the nasty overhang on the bottom of his model, I just couldn't print that one to be happy with the result.
So I logged into my trusty Onshape and modeled my own version. It is very simple to print and I believe it will work at least as well. :)
Created from the scratch, but heavily inspired by the species work. Feel free to use it.
Recommended settings
Material: It doesn't matter, I used rainbow silk PLA and some leftover Polymaker PolyTerra
Layer height: 0.15 for Shell, 0.2 for Tray
Perimeters: It doesn't matter, I used 4
Infill: It doesn't matter, I used 40% because I printed it from rainbow silk
Infill Type: It doesn't matter, I used cubic
Supports: No
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (181)