Grom Clone Document Container.

This remix I shortened the threads on the container and shortened the cap.  I also changed the angle of the mount so cap can be acessable and made recess for the nuts to be pressed into the flange. I expanded the cap diameter by 1mm to make it thread on easier. 

(The hardware I used was from the bikes shipping package frame)

Waterproof(ish) container for my grom clone. Mounts to the farthest rack mount bolt holes on my Taotao hellcat 125cc Same as grom or boom Vader. 

-PETG or higher temp resistant filament. 

-Print vertical no support needed. 

-For cap I changed it to print with the Adaptive Quality setting to improve threads.