Lamp Electric guitar in real size

Step 1 - Insert Nut M4x6x6 ( You need 8EA) into the holes, then start to screw in the M4x12 screws (You need 8EA).
Step 2 – After twisting the 3 pieces into the box, stop.
Step 3 – Insert the cable through the notch in the Honey Comb Bottom.
Step 4 - Holding the cable, place the Plane Bottom.
Step 5 – Install the last two screws into the Plane Bottom holes.
Step 6 – Clip the control and put the sensor through the hole in the Honey Comb Bottom so that the LED sticks out through the hole.
Step 7 – Stick the LED strip to the walls of the Box.
Step 8 – Replace the cover.
Step 9 – Put the lamp on the stand and enjoy :)