Ledstrip corner guide
Print Profile(3)
Description
A guide suitable for getting ledstrips around a 90 degree corner. Especially useful for TVs, as this design makes sure there is no ‘empty’spot of lighting in the corners outside of the TV.
The base is flexible so it can adjust to the surface and the angle can be precisely set to 90 degrees. My recommendation is to first attach the ledstrip to the guide, and then the guide to the TV or other surface. This way the ledstrip can be set in the desired angle (90 degrees or slightly different than that if wanted)
Suitable for ledstrips up to 15 mm. Bigger is possible but it will stick out a bit from the print. Use double sided tape to attach it to the surface.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (225)