Logitech C930e Mount

This allows for mounting a disassembled Logitech C930e (and possibly other C9xx models) to the front door of a Bambu X1C/P1S.

Instructions:

• Install four (4) M2x2 Inserts in the holes of the base. You could probably use M2x4, but I chose M2x2.
• Install the internals of a disassembled Logitech C930e into the base. This is a snug fit intentionally.
• Install six (6) 25x4x3 magnets in the front of the Case. These are friction fit, but you could add a drop of glue if they're too loose.
• Install the Face in the front of the Case. Apply slight pressure around the edges of the Face until it's resting against the stops of the Case. This is a friction fit, but you could add a couple drops of glue if it's too loose.
• Attach the Case to the Base using four (4) M2x6 screws.
• Install six (6) 25x4x3 magnets in the Backplate.

Once assembly is complete, place the completed Case on the outside of the glass door and use the Backplate on the inside of the door to hold the camera in place.

I recommend using Matte PLA for all parts. I would specifically use black for the Face to prevent the lights on the camera from creating a glare on the glass door - alternatively, one could remove the lights on the camera.