Overwatch 75 Small Medpack
Print Profile(0)
Description
Print Quantity:
1、Any color: Support ring * 2
2、Transparent: Upper and lower cover translucent * 8, light guide column * 1
3、Red: cross * 2
4、Black: Connection * 2; 4-light C * 1; 4-light * 1
5、White: Positive claw * 4; Oblique claw * 4; Rotating column * 2; Column * 1
Extra part: A transparent acrylic tube with an inner radius of 23mm, an outer radius of 25mm, and a height of 82.5mm, used to increase surface smoothness. It is optional, but the surface will be a little rough without it.
Screws: M1.6*5 self-tapping screws * 20; M3*5 self-tapping screws * 8; M3*12 machine screws (slightly longer is acceptable) * 8; M3 nuts * 8
It is recommended to print several extra white folder positive claws and oblique claws to prevent breakage from accidental drops.
Electronic parts: 4 PCBs (open-sourced on LCSC), powered by a 3.7V lithium battery (10mm thick, 20mm wide, 60mm long), TP4056 with Type-C charging, 2835 surface mount ice blue LEDs * 16, ME6206A30XG * 4. This part requires self-soldering.
Warm reminder: This model requires PCBs to light up, and the PCBs are part of the structure. If you do not need it to light up, you can omit printing the support rings and light guide columns in any color, and reduce the number of M3*5 self-tapping screws by 4. Alternatively, you can print two 30mm diameter and 1.6mm thick discs to prevent internal shaking and noise.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)