Zodiac

cover

modelbild.jpg

20250227_202736.jpg

20250227_202741.jpg

20250227_203026.jpg

20250227_203028.jpg

plate_1.png

2025-02-27_b33508d534403.jpg

0.16mm layer, 2 walls, 60% infill

3xoneafteranother.jpg

Alle 3 werden nacheinander gedruckt. Nicht geeignet für den A1 mini. All 3 are printed one after the other. Not suitable for the A1 mini.  &nbsp;

All three are printed sequentially. Unsuitable for the A1 mini. All three are printed one after the other. Not suitable for the A1 mini.  &nbsp;

3xone after another 0.16mm layer, 2 walls, 60% infill

Neo-Racer

temp.JPG

0.16mm layer, 4 walls, 60% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

After testing several models available on MakerWorld, I decided to create my own design for improved stability.I have already tested the prints with TPU 95, and they work very well for me—no breaks or significant bending even after numerous throws.For the next print, I will test PETG, provided that stability is ensured.Specifications:<ul><li>Thread: BA2 (standard)</li><li>Length: 71.6 mm</li><li>Flight width: 35 mm</li><li>Shaft width: 5.9 mm to 5.0 mm</li></ul>If you like my models, I’d appreciate a follow!<h3>Deutsche Übersetzung</h3>Nachdem ich mehrere Modelle auf MakerWorld getestet hatte, entschied ich mich, mein eigenes Design zu erstellen, das stabiler ist.Ich habe bereits Drucke mit TPU 95 getestet, und sie funktionieren für mich sehr gut – keine Brüche oder starke Verbiegungen, selbst nach zahlreichen Würfen.Beim nächsten Druck werde ich PETG testen, sofern die Stabilität gewährleistet ist.Spezifikationen:<ul><li>Gewinde: BA2 (Standard)</li><li>Länge: 71,6 mm</li><li>Flügelbreite: 35 mm</li><li>Schaftbreite: 5,9 mm bis 5,0 mm</li></ul>Wenn dir meine Modelle gefallen, freue ich mich über ein Follow!

Following extensive testing of various MakerWorld models, I designed this iteration for enhanced stabilityI have successfully 3D printed this design using TPU 95, achieving exceptional durability—no fractures or significant warping, even after repeated throwsMy next print will utilize PETG, contingent upon maintaining structural integritySpecifications:<ul><li>Thread: BA2 (standard)</li><li>Length: 71.6 mm</li><li>Flight width: 35 mm</li><li>Shaft width: 5.9 mm to 5.0 mm</li></ul>Your follow would be greatly appreciated<h3>German Translation</h3>After testing several models on MakerWorld, I decided to create my own design for improved stabilityI have already tested prints with TPU 95, and they work very well for me—no breaks or significant bending, even after numerous throwsFor the next print, I will test PETG, provided that stability is ensuredSpecifications:<ul><li>Thread: BA2 (standard)</li><li>Length: 71.6 mm</li><li>Flight width: 35 mm</li><li>Shaft width: 5.9 mm to 5.0 mm</li></ul>If you like my models, I would appreciate a follow

Print Profile(3)

Description

German Translation

Comment & Rating (75)

License