Solo Leveling Kamish's Wrath - "Right"

• This design is for the “Right” Kamish's Wrath Dagger. (The “Left” version is on my profile)
• The puzzle version is held together with "ties" inspired by woodworking ties.

Read Before Printing:

General Notes

• Puzzle Version = Multipart / No AMS required version (Refer to Assembly Video Here)
• Recommended Glue: Super Glue/Cyanoacrylate (Please be careful while handling)
• Unfortunately, there will be visible seams for the puzzle version as tolerances exist.
• If the ties are too loose/tight, I've included the STL for tighter/looser versions (Click on the download STL button)

Puzzle Version (CANON SCALE)

• There was an error I've made while scaling the original version of this dagger, the STL files are at 125% scale (89cm).
• If you're downloading the STL files, please scale them down to 80% for a more accurate size.
• If you do not mind sanding and painting, print this in one colour instead as the parts are split by colour.

Puzzle Version (50% Scale)

• There was an error I've made while scaling the original version of this dagger, the STL files are at 125% scale (89cm).
• This print profile is actually a 62.5% scale due to the error.

• If you've printed the “50%” scale version, the matching set for the “Left” dagger should be 62.5% scale. 

  (I've scaled the other dagger correctly this time)

Multicolour Version (10-30% Scale)

• This version only requires glueing the two halves of the daggers together.
• Warning: this version will consume a large amount of filament as waste as there are numerous filament purges/changes.
• This print has been tested up to 10% with decent details.