Fate - Gilgamesh - Chains of Heaven (1:1 Single Plate Printing, Supports Color Separation)

Fate Noble Phantasm collection  https://makerworld.com.cn/collections/2321863

2025.03.27  I had some leftover filament, so I printed an Enkidu's Chain for testing, and there were generally no major issues The tip is best trimmed flat, and remember to glue the chain links connected by wedges, otherwise, they might come off if too much force is applied

  For the filament color, it is recommended to print the main body with PLA Silk Gold, then individually color the black and silver parts with a paint pen This should achieve a relatively accurate anime effect

  The single plate chain combination in the print profile is roughly 80cm long when fully assembled If you feel the chain is not long enough, you can print additional chain links to extend it

  You can choose to continue assembling the chain from the original plate, or use another solution I uploaded

   Semi-Print in Place Chain (approx 1.6m long after assembly) from Salted Fish Stargazer - MakerWorld

  A conflicting point with this solution is that the overhang displacement due to no supports is relatively large Those who can accept this can print it

-------------------------------------------------------------

I finished making Enkidu's Chain these past few days Tyrant Gilgamesh may be evil, but he is cool

Enkidu's Chain, as the bond between Gilgamesh and Enkidu, I had to make one (definitely not because EA is too difficult)

The original design drawings are unfortunately very few, so some proportions had to be adjusted by myself

I wonder if anyone likes Wise King Gilgamesh I feel the book and axe are just mediocre

Afterward, I plan to complete the Zero or Stay Night versions first