Bugasalt 3.0 Wurkkos HD01 holder
Print Profile(1)
Description
I designed a simple attachment mount for securing a Wurkkos HD01 flashlight/laser pointer onto a Bug-A-Salt v3.0 salt blaster. The mount is angled 1.5 degrees upwards, so in theory, the laser should align at 2 feet from the muzzle.
š¹ Fit & Print Settings:
- Printed in PETG at 260Ā°C, resulting in a perfect snug fit.
- Other print settings shouldn't matter much.
š¹ Installation:
- Remove the belt clip and reinstall the three T6 Torx screws.
- Insert the mount with the laser side up and charge port down for best alignment.
- It can be inserted both ways if the laser is misaligned.
š¹ Note:
The Wurkkos HD01 laser in my case is terribly misaligned and points slightly to the side. This mount should help correct that to some extent.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)