elis670

cover

plate_1.png

20250202_213040071_iOS.jpeg

This is for the Smaller Launcher Closure - base for the missile

0.16mm layer, 2 walls, 15% infill, 100% Launcher Closure

plate_2.png

plate_3.png

plate_4.png

This is for the Larger Base, Launcher Closure, that I printed on the A1 with a .6 Nozzle.Some filaments work better and do not clog with the .6 nozzle.It still works with the .4 nozzle when you change the setting to match.

0.6mm nozzle, 0.3mm layer, 2 walls, 8% infill

plate_5.png

plate_6.png

plate_7.png

plate_8.png

plate_9.png

plate_10.png

plate_11.png

plate_12.png

plate_13.png

plate_14.png

2025-02-25_eac45b3338283.jpeg

I will add some actual filament used later on…&nbsp;But I like the ProtoPasta Iron PLA for the Launcher Closure Door railsCC3D PLA Max PLA+ Army Green for the racewayPolymaker Matte PLA Filament Forest Green 1.75mm 1kg 3D Printing Filament, PolyTerra 3D Printer PLA Filament for the 3rd stageand I used silk gold and silver from Bambu for the PSRE, but it probably should be the Polyterra Forest Green for the places I used gold.&nbsp;The larger platform barely fits on the A1, so it won&#39;t fit on the mini.  But the 100% one fits great on the mini.

200% size, 3% infill, 2 walls

Ol' Greg

PXL_20251017_013220766.MP~2.jpg

PXL_20251017_013327531.MP~2.jpg

PXL_20251017_013422729.MP~2.jpg

the-color-variations-of-minuteman-iii-icbms-v0-ruc75gidcq5f1.webp

The biggest change here is this will print just 1 missle instead of 9. I also removed the painted conduit track. For the most part in the pictures the color of that matched the segment piece and I didn&#39;t want to waste a quarter roll of filament due to flushing colors.&nbsp;I also changed the wall and infill settings to lower values, I was seeing about a 50% less filament usage on this profile vs the designers. This is just a model that sits, I don&#39;t think it needed the exorbitant amount of filament of the original. Instructions: <a target="_blank" rel="noopener noreferrer ugc" href="https://www.thingiverse.com/thing:4283314#Summary">https://www.thingiverse.com/thing:4283314#Summary</a> A note on assembly too, check the comments on the original, you&#39;ll see there is a protrusion the designer left that you need to cut/sand/file down in order to get fitment. I printed that area with extra walls to facilitate that.

Single Missle - 0.16mm layer, 2 walls, 5% infill

Minuteman III Missile Model

Print a piece of our Deterrent Systems!I found this model on Thingiverse after a friend of mine shared it with me as well.Since then I have modified it quite a bit to get it to fit nicely at 200% the original size and to where it just fits on the print bed

MMIII MinuteMan ICBM Missile

ASIA

Print Profile(4)

Description

Comment & Rating (14)

This remix is based on

License

Related Models