Organizer Box XL - Insert with 15 Compartments

This design is based on the excellent model Organizer Box XL by @3DPrintyi and the remix Organizer Box XL Labelled Inserts by @RadidRabbit.

Many thanks for both your designs!

I wanted to use the boxes for M2 and M3 size screws. Therefore, I encountered several challenges which I attempted to address with this remix:

The compartments, with their labels, proved too small for my fingers, making it difficult to remove items such as washers. Furthermore, the washers were prone to sliding into other compartments when the boxes were rotated. While I found the labelling useful, each insert should ideally allow for individual labelling.

Therefore, I have made the following adjustments:

• 15 compartments
  → Easier access to contents
• Rounded lower inner edge of compartments
  → Easier removal of contents
• Lid adapted to the design to ensure a tight seal
  → Prevents items from shifting into other compartments when rotating the boxes
• Modular label design (inserted)
  → Allows for personalized labeling

For the box, additional inserts, and storage boxes, please use the designs from the original designer Organizer Box XL. They also provide printing tips there.