HP 524/527 SA and SF monitors elevated VESA Mount
Print Profile(1)
Description
Retrofit an elevated VESA 100 mount that will make your HP monitor look like just any other monitor. The elevated VESA mount will give a balanced look when mounted on a monitor arm.
The two side panels are optional. The one on the right side is for cable management and the one on the left will accommodate a small USB-hub since this is missing on the monitor itself.
Only M5 screws are used.
- VESA mount to arm 4 x 16 mm M5 with washer and nut.
- VESA mount to lower monitor fixture 1 x 10 mm M5.
- The optional side panels are mounted with 2 x 10 mm M5 each.
The VESA adapter can be attached to the back of the monitor using some double sided tape. This is optional, but if you use a weaker filament this is recommended. The side panels can also be attached with some backup double sided tape depending on filament.
The filament used in the images is the Bambu Lab ABS GF. But most strong filaments will suffice.
The adapter should be compatible with most HP monitors with the vertical version of their mount but has not been tested. E.g. HP M22f, M24f, M24fw, M24fd, M27f, M27fw, M27fq, M27fd, M32f, M32fw.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)