VEVOR 6-ton press alignment components
Print Profile(1)
Bill of Materials
- BoltM6x30 x 1: 4
- NutM6 x 1: 4
Description
The VEVOR 6 ton press is a budget hydraulic press. Unfortunately all the parts come from the factory very loose, which makes pressing with it more difficult than it needs to be. These alignment parts ensure that the press will move correctly.
NOTE: I'm unsure how tight the production tolerances of VEVOR presses are, these parts fit my press, might require some sanding if your press dimensions are different.
To assemble 4 M6x30 bolts and 4 M6 nuts are required. Alternatively 4 threaded rods M6x40 and 8 M6 nuts can be used.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)