Whimsical Mushroom Bookmark
Print Profile(1)
Description
This is a Mushroom Bookmark with a bit of a whimsical aesthetic for anyone who enjoys a bit of nature while they read.
Makes for a unique and pleasing way to mark your locations in your books.
Simple to print no AMS needed just follow the swap instructions.
Swap Instructions:
Start with Charcoal
At layer #9 (0.8mm) swap to Grey
At layer #13 (1.12mm) swap to BambuLab Green
At layer #15 (1.28mm) swap to Ivory White for the rest.
The filaments I used are as followed:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA Sunlu Meta Grey Transmission Distance: 3.5
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
Should work fine with differnt brands but similar colors and of course feel free to mix and match colors to come up with somthing possibly a little more crazy and whimsical but result may vary.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)