FoxAlien CNC Router Dust Shoe Adapter 42mm to 65mm - Free 3D Print Model

Search models, users, collections, and posts

FallDamage

Tools>Machine Tools

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.4mm Nozzle 0.2mm layer, 2 walls, 15% infill

Designer

57 min

1 plate

5.0(7)

0.6mm nozzle, 0.3mm layer, 2 walls, 15% infill

Designer

46 min

1 plate

5.0(1)

Open in Bambu Studio

Boost

145

161

Released

Description

This dust shoe adapter converts the FoxAlien 42mm dust shoe for their 60W spindle to 65mm. It uses all existing hardware from the FoxAlien dust shoe. It allows you to use the much less expensive dust shoe with a 65mm trim router. It uses the bottom half of the FoxAlien dust shoe, original brushes, and all original hardware. The magnets swap over with 2 screws, and then it snaps together with ease. It is designed to be low profile so it does not interfere with Z-Axis height. Designed for a 30mm suction hose.

Can be used with any CNC router using a 65mm trim router, and the FoxAlien 42mm dust shoe.

Recommended to print in PETG-CF to resist abrasion from chips.

Comment & Rating (9)

@user_1021840347

Print Profile

0.4mm Nozzle 0.2mm layer, 2 walls, 15% infill

Exactly what I was looking for

Show original

@letitbe.7

Print Profile

0.4mm Nozzle 0.2mm layer, 2 walls, 15% infill

great!

@user_2615097374

Wish I took the time to read this better. I added a centec adaptor to the top of the extraction hose and then realised my current dust boot is the 69mm one. so the base doesn’t fit. Don’t suppose you could desgin this for the 69mm dust show base

@user_3225655965

Print Profile

0.6mm nozzle, 0.3mm layer, 2 walls, 15% infill

@user_2900360479

Print Profile

0.4mm Nozzle 0.2mm layer, 2 walls, 15% infill

@gismo5639

Boosted

Print Profile

0.4mm Nozzle 0.2mm layer, 2 walls, 15% infill

@RayV

Print Profile

0.4mm Nozzle 0.2mm layer, 2 walls, 15% infill

@chipmunk3160

Print Profile

0.4mm Nozzle 0.2mm layer, 2 walls, 15% infill

@tersh

Print Profile

0.4mm Nozzle 0.2mm layer, 2 walls, 15% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.