Print Profile(1)
Description
Printed with 100% infill, a 0.08mm layer height, and a 0.16mm base layer.
The print model is 133.54x200.5mm
You can print with greater layer heights below the Minimum Depth of 0.48mm
The Maximum Depth is 2.2mm and the Current Depth is 1.4mm
Filaments used:
Bambu Lab Black PLA Transmission distance: 0.6
Bambu Lab Red PLA Transmission distance: 4
Sunlu Yellow PLA Transmission distance: 6
Bambu Lab White PLA Transmission distance: 5
This print uses 4 Unique filaments
Replacement instructions:
Begin with Black
At layer #5 (0.48mm) switch to Red
At layer #8 (0.72mm) switch to Yellow
At layer #12 (1.2mm) switch to White for the remainder
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)