Rare Disease Day - HueForge III

We are approaching the Rare Disease Day (the last day of February).  Rare Disease Day is the globally-coordinated movement on rare diseases, working towards equity in social opportunity, healthcare, and access to diagnosis and therapies for people living with a rare disease.

This is something of personal importance to our family and I made a few Hueforges for family and friends. Uploading it here too to raise some awareness, especially in current times. 

You can learn more about this day here: https://www.rarediseaseday.org/what-is-rare-disease-day/

The zebra is the official mascot for rare disease patients. Historically, medical professionals were told that when they “hear hoofbeats,” they should not expect to see a zebra. In other words, look for the more common answer, a horse. Now, we know that one in ten Americans is actually a zebra! It might not be obvious when you look at us, which is why we show our stripes to raise awareness.

Please check other Rare Disease Day HueForges here: https://makerworld.com/@Djelkgrove/collections/5130412

About the HueForge:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 160x160mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.4mm

This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to Dark Red
    At layer #14 (1.2mm) swap to BambuLab Green
    At layer #20 (1.68mm) swap to Marine Blue
    At layer #23 (1.92mm) swap to Jade White for the rest.
 

I have added a pause in the print so that you can swap first color with the last one in your AMS, if you have.