The Goonies Lightbox - Led Lamp
Print Profile(1)
Description
Commercial License ----- https://www.patreon.com/Valda3DPrinting
The 3D model of the Goonies movie logo
You will find each file named by color for an easy setting.
- Import them in Bambulab/Orca as single object with multiple parts.
- Assign each color to the same named part ("wall" is always withe to create a nice bright outline)
- The “Backbox” have an 4.5mm hole for the lights wire
- Use a PEI Textured plate for an optimal result
To achieve a nice result be sure to have settings as follow
- first layer flow ratio = 1.05
- wall transitioning threshold angle = 50°
- Infill/wall overlap = 20%
- Avoid crossing walls
Once you have printed the model glue inside the backbox a ledstrip (multicolor or withe) and wire it trough the provided hole… you have your lightbox ready! ^_^
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (32)